Printed parts priced the moment you upload the file.
Three processes, eleven materials and real finishing options — quoted by the same material and machine-time math our shop runs, not a guess from a form.
Pick the process that matches the job
Not sure? Upload the model and quote it two ways — the calculator prices every process against the same geometry.
FDM / FFF
Fused filamentThe workhorse for functional prototypes, jigs and enclosures. Widest material range and the lowest cost per part.
- Build volume
- 350 × 350 × 400 mm
- Layer heights
- 0.12 / 0.20 / 0.28 mm
- Tolerance
- ±0.3 mm or ±0.3%, whichever is greater
SLA / Resin
StereolithographySmooth, detail-faithful parts for cosmetic models, housings for casting and small precision geometry.
- Build volume
- 218 × 123 × 235 mm
- Layer heights
- 0.05 / 0.10 mm
- Tolerance
- ±0.15 mm or ±0.15%, whichever is greater
SLS Nylon
Selective laser sinteringIsotropic, support-free nylon parts. Best choice for living hinges, snap fits and end-use mechanical components.
- Build volume
- 330 × 330 × 420 mm
- Layer heights
- 0.10 mm
- Tolerance
- ±0.25 mm or ±0.25%, whichever is greater
Eleven stocked materials
Everything below is on the shelf and priced in the instant quote tool. Need a specialty polymer, ESD-safe grade or flame-retardant blend? Ask and we will source it.
| Material | Process | Density | Best for |
|---|---|---|---|
| PLABlack, White, Grey, Red, Blue | FDM / FFF | 1.24 g/cm³ | Stiff and dimensionally stable. Ideal for fit checks and display models. |
| PETGBlack, White, Clear, Grey | FDM / FFF | 1.27 g/cm³ | Tougher than PLA with better moisture and chemical resistance. |
| ABSBlack, White, Grey | FDM / FFF | 1.04 g/cm³ | Heat tolerant and machinable, vapor smoothable for a molded finish. |
| ASABlack, Natural | FDM / FFF | 1.07 g/cm³ | UV-stable outdoor grade with ABS-like mechanics. |
| TPU 95ABlack, Natural | FDM / FFF | 1.21 g/cm³ | Flexible elastomer for gaskets, bumpers and strain reliefs. |
| Nylon CFBlack | FDM / FFF | 1.16 g/cm³ | Carbon-filled nylon for stiff, heat-resistant load-bearing parts. |
| Standard ResinGrey, Black, Clear | SLA / Resin | 1.12 g/cm³ | Crisp surface detail for visual models and enclosures. |
| Tough ResinGrey, Amber | SLA / Resin | 1.15 g/cm³ | Impact resistant, suitable for snap fits and functional testing. |
| High-Temp ResinAmber | SLA / Resin | 1.18 g/cm³ | Holds form past 200 °C — mold masters and thermal fixtures. |
| PA12 NylonNatural white, Dyed black | SLS Nylon | 1.01 g/cm³ | Durable, chemical resistant workhorse powder for end-use parts. |
| PA12 Glass-FilledGrey | SLS Nylon | 1.30 g/cm³ | Added stiffness and heat deflection for brackets and housings. |
Tune strength, detail and finish
Infill — FDM only
- 15% — light
- Visual models, non-structural
- 25% — standard
- General purpose
- 50% — strong
- Load bearing
- 100% — solid
- Maximum strength, heaviest
Finishing
- As printed
- Supports removed, layer lines visible
- Sanded & deburred
- Support marks sanded, edges cleaned
- Vapor smoothed
- Glossy molded look — ABS and ASA only
- Primed
- Filler primer, ready for your paint
- Painted, single color
- Primed and sprayed to a named color
- Dyed black
- Through-dyed nylon
Rules of thumb that save you a revision
- Minimum wall thickness: 1.2 mm on FDM, 0.8 mm on SLA, 1.0 mm on SLS
- Holes print undersized — we ream critical bores or you can add 0.2 mm clearance
- Overhangs past 45° need support; call out cosmetic faces and we orient around them
- Threads: print M4 and larger directly, or we install heat-set inserts on request
- Send STL, OBJ, 3MF or STEP. STEP is preferred when tolerances are tight
Every file gets a manufacturability check before it runs. If a wall is too thin or a feature will not survive support removal, we tell you and suggest the fix — before you are charged for a failed build.
What customers print with us
Functional prototypes
Fit, form and function checks before you commit to tooling.
Jigs & fixtures
Assembly aids, drill guides and test fixtures built to your bench.
Enclosures
Housings for electronics, including cutouts for the connectors you specify.
Low-volume production
Bridge runs of tens to low thousands without an injection mold.
Replacement parts
Obsolete or single-source components reproduced from a sample or drawing.
Casting & molding masters
High-temp resin patterns for silicone tooling and investment casting.